DVR Viewer. FREE. Download . Downloaded this app for my dvr player so hopefully it'll work with my cameras. Cannot enter alphanumeric password.
Table of contents
Software Name: Google Inc. Latest version 2. Freeware Software Categories: PlayStore Supporting Operating Systems: Android Os type: Multiple languages File size: The following features are offered by Google Play store for Blackberry devices. Some of the features are left with the intention to highlight the most needed features to the best of your needs.
Google Play store BlackBerry is compatible with all sort of BlackBerry Versions, and it is applicable for both bit and bit users. Get Google Play store for BlackBerry now. Follow the simple steps to download and install the play store with minimum time limits for your Blackberry devices. Click on the Settings tab and then Firewall. Scroll down to select User Defined. Click on Add a new userdefined application.
STEP 6. STEP 7. Ensure that TCP is selected. STEP 8. Enter 85 in the From and To boxes for Port or Range. STEP 9. Leave the next two boxes blank to use the default settings. STEP Click on Add to List. Your router will require you to log in to accept the settings. If you have not created your own password for your router, it is the digit System Key printed on the label on your router between the square brackets [ ].
Once your settings have been confirmed, repeat Steps , this time entering for the From and To ports. Clicking on Add and then Save. Enter 85 into the box labeled What Port? Click on the Check button. You should see a green Success message. If not, return to Your IP: Pa STEP 4. Master Stream Sub-Stream This website will also display your Public IP address near the top of the page above the box where you entered your port number.
This is the number which you will use to access 1 the 2 NVR using a web browser or your mobile device from outside of your local network away from the building in which your NVR is located. It will be useful for users who wish to check to see if a server or ISP is blocking certain ports. If you are successful after changing from port 85, then you will need to add that to the IP address when accessing the NVR via the Internet.
If, for example, you changed to port 81, the address would now read: Color P. Z 10 Fine Protected Mode: On With the exception of 2Wire brand routers, when a router or networked device reboots due to a power loss or other issue, the addresses will change and the port forwarding configuration will no longer work. For that reason, unless you have a 2Wire router, we recommend changing your NVR s network setting to a fixed, or static IP address which will not change. Return to the Network Menu. Uncheck the box marked DHCP. Click Save. Proceed to Section 1.
You will not have to worry about Static IP previous section. Click the Network Settings button. Click OK to save your settings. Click on Save in the Netwok window before closing that window. The sections below allow you to take advantage of additional features including the ability to access your NVR using a conventional domain name and having your system send out alerts. Return to your router s control window.
If you did not have to open your router in a previous step, simply open a new browser window and enter the Gateway address covered in Section 1. Locate your router s status window may also be named Information or Info, it will list the DNS number. You will only need to use the primary set of numbers - write it down for later use. You do not need to have an alternate server. Click Save to save your settings. Subnet Mask: Default Gateway: Primary DNS Server: Secondary DNS Server: Click on the System Preferences icon at the bottom of the Macintosh s screen. Click on the Network icon. Make sure that your network connection is highlighted in the list of connections to the right of the main part of the Network window and that its status reads Connected.
The DNS server information will be shown. Write this down for use in the next section. It also allows you to avoid having to repeat Sections 1. To find out the number of routers on your network, you will need to download a FREE router detection program. Register with the website and follow the instructions for creating a domain name.
The website will display your pubic IP address and your domain name which will look like this: In your NVR, open the Network window. Click on Detect Multiple Routers to begin the download. Check the Enable box and select MyQ-See. Unzip the application to install it. Enter your account information including the user name and password that you used when creating your domain name. Click the Save button to preserve your settings. When you return to the Network window, ensure that the DDNS box is checkmarked before clicking on Save as well before closing.
If there is only one router detected, and you are using UPnP, then you will need to turn off that setting and attempt to connect using DMZ as described in Section 1. Find the DMZ page in the router settings. If you do not have a DMZ setting in the router, check to see if there is a Bridge setting. If so, then use the Bridge setting instead of DMZ. If Multiple Routers are Detected If there are multiple routers, you will see a display similar to Picture If so, it may be preferable to connect your NVR and computer to the router that connects directly to the Internet. However, this is not always possible depending upon your particular situation.
Save your changes. You have forwarded the ports on the router to which the NVR is connected, to the IP address of the NVR, and set the second router to pass the connection to this router. If only one router is detected you will need to consult your router s manual. In addition, you can see which users are online, limit online access and more. This feature enables you to allow online users only from approved IP addresses.
Up to 64 addresses may be entered. If you have proper system management rights Configured in Account, See Section 4. The maximum time a user can be disconnected is 18 hours 65, seconds. If this feature is not enabled, then users can connect from any IP address if they have the correct user name and password information.
Utilizing this feature allows your NVR to keep an accurate time as well as automatically adjust to Daylight Savings Time changes. NTP was set up as part of the Startup Wizard process, but you can always return via the Advanced Settings area of the Network menu to make adjustments. Server IP - The default server used to obtain accurate time is the Windows server, but you can manually enter in another.
Port - This is the port that the NVR will use to contact the server. Time Zone - You will need to set your time zone. For North America these are: Synchronize - Clicking this will cause the NVR to update the time immediately. Several NVR functions allow you to send out alerts when specific events occur. Configuring this feature lets you set the NVR up to send out alerts via to a single recipient. You may need to contact your provider or IT department for some required information.
Depending upon your settings, the system can generate a lot of alerts. For that reason, we recommend setting up a dedicated address specifically for the system to send alert notices. If you do not have your own system such as a corporate mail server you should consider using a free provider.
However, because many free services allow only a limited amount of traffic we specifically recommend using Google s Gmail service with its higher limit. Similarly, you will want the alert s to go to a different account than the one sending them. This will ease your management of these alerts. Title This is the subject line of s generated by this NVR. Receiver This is the recipient account. Interval This adjusts the amount of time that will pass before the NVR sends out another. The interval can be set from 0 seconds to ten hours seconds.
Συννεφιασμένος στα αγγλικα
If you are getting too many s, you may wish to increase the length of the interval. Using this feature also helps prevent overloading your outgoing server. Follow the software s instructions to set up your service, password and FTP folder. You will need to grant Write privileges to the FTP upload user. Enter the FTP server address, port and remote directory. If the remote directory is left blank, the system will automatically create folders according to the IP, time and channel. File Length This is the maximum length in minutes. Files under the maximum will upload completely.
Files longer than the maximum limit will only upload to that limit and not continue. If the value is left at 0, there is no limit and the system will upload all files completely. Recordings made during the time s selected will be uploaded to the server. You can specify which type of incidents will be uploaded as well. Complete instructions on their use can be found in Chapter 5 of the User Manual. The Record Setting window is located in the Setting menu. If you are experiencing any performance issues in your remote or mobile viewing, adjust the settings in the Extra Stream portion of the Record Setting window.
The CBR bit rate type is generally better for remote streaming. Adjust the frame rate to find the best performance for your particular situation. This includes which cameras can be monitored and played back, PTZ controls and other aspects. The Account window can be found in the Advanced menu. Some users may need to configure Microsoft s built-in ActiveX controls prior to logging into their NVR in order to ensure smooth operation.
Check the box next to Reusable for that account before saving and exiting the window.
- iphone 5 speaker volume control!
- download gmail client for nokia e71.
- roxio, 'roxio my dvd' || roxio download and hack?
- On the air with CSCMP – CSCMP's Supply Chain Quarterly!
Uncheck the Require server verification for all sites in this zone button. Close the window. Pull down the Reset to: Click the Custom level button. Click Yes when asked, Are you sure you want to change the setting for this zone? You will see a log in screen similar to that shown in Picture or yellow alert bar at the top of the window asking for permission to open an ActiveX application.
Allow it to install webrec. Proceed to Section 3. User Account Control for Windows Vista and Windows 7 Some users of computers using Windows Vista or Windows 7 operating systems may receive an error message informing of a codec that is missing or not installed. Open the Control Panel accessible by clicking on the Windows icon in the lower left of your screen. Select User Accounts and Family Safety.
You will then be asked to restart your computer for the change to take effect. Select Add or Remove User Account. Open up the Start Menu accessible by clicking on the Windows icon in the lower left of your screen. Select the desired user account. The User Account Control will open or you will be offered a link to click to open it. Move slider to lowest setting and press OK. The file is also available for free download on Q-See. One extraction program can be downloaded for free at at STEP 1. Double click on the PSSSetup. A shortcut icon for the PSS application should appear on the desktop.
If you do not see it, the program can be found in the Programs folder. Double click on the icon to run the program. If you do not see it, the program can be found in the Applications folder. This has led to some instability in the PSS software. This issue is currently being addressed with a completely new You can also use PSS Mini on systems running Determine which version of the Mac OS you are using before proceeding.
You can find which version of the Macintosh operating system your computer is running by selecting About This Mac from the Apple menu in the upper left of your screen. OSX It is available for free from CNet. It is available for free at PSS will automatically launch and run inside of XQuartz and will show up as X11 in the application bar at the top of the screen. PSS Mini is installed and operated in the same manner as is PSS start with Step 1, above for installation , but a few features are not available: User will need to manually add a DVR or camera to the list. Can display maximum 16 channels at a time.
Cannot remotely configure or reboot DVR. No Emap feature. Cannot record or backup video to computer s hard drive. Snapshot feature is disabled Please note that these features only apply to operations on the Mac computer itself. These features will be restored in the new software. Safari is not supported. Macintosh users and PC owners who do not wish to use Internet Explorer should use the version of Pro Surveillance Software appropriate to your platform.
- Windows phone surveillance software dmss.
- flood it mobile work light;
- DVR Viewer & Software Downloads.
- DVR Viewer Software Videos.
- zynga poker app for android free download.
Enter the User Name and Password in the appropriate fields. The default user name and password are admin and admin. We strongly recommend that you modify your password after you first log in for improved security. Within the Explorer window, the display has several sections, each with their own function. Cameras - Clicking on one of the camera icons will open the corresponding channel.
Cameras will be numbered as they are on the NVR. Stream - You can select whether to use the main data stream or the smaller Extra Stream also known as a SubStream which may provide smoother video if you have bandwidth issues. Open All - Opens all available cameras Refresh - Refreshes camera list Start Dialog - If you have a microphone and speaker co-located with a camera and you have a microphone connected to the input port on the back of the NVR, you can initiate a bi-directional dialog with a person near that camera.
There are two options: Local Play - Open and playback a recorded video file saved on your computer. The files are saved as. PICTURE It should be noted that the screen outlined in green is the one that will be affected by any control inputs and that clicking on another screen will highlight that one instead, making it the one that will be controlled. Double-clicking on any of these will open a window over the live display allowing you to set or enable options and functions. Their use will be described later in this section. The color of the camera icons indicate their status: Icon Status Online Offline Playing Back In live view mode, cameras can be turned on and off by clicking on their icon.
They can be positioned as you desire within a multi-screen mode by clicking on a frame to highlight it and then clicking on the camera s icon to make it gold active. While you can refer to 6. Picture Controls This control panel combines two tabs which allow you to control the appearance of the on-screen images Color tab as well as set the location where downloaded image and video files will be saved More tab.
The color controls will only affect the screen view that is highlighted in green in the Real- Time Monitor window. They are, in order: Brightness, Contrast, Hue and Saturation and are adjusted by moving the respective slider.
Selecting Reset will revert the settings to their defaults. The arrow button at the bottom of the control panel will show or hide the controls for utilizing presets, tours and etc. PICTURE Pic Path and Rec Path both operate in the same manner in allowing you to set where downloaded still images and recorded videos, respectively, will be saved on your hard drive.
You can navigate to the desired save location as you would saving any file on the computer using the Browse option. Videos will be saved as. Still images will be saved as. Videos and still images can be saved in the same folder or in different areas of the computer depending on your preference. Reboot will attempt to restart the computer. It will not work if you do not have administrator privileges on that computer or if there is another local user logged into the computer. The number of screens being viewed at once is set with the Image View Options at the bottom of the screen described below , but at any time, you can double-click on any channel in multi-view mode to make it a single-screen view.
Double-clicking on the screen will return it to its place in the multi-view display. Image View Options This row of buttons along the bottom of the Real-Time Monitor area allow you to set how you will view the video feeds in addition to how many screens will be displayed simultaneously. When you do not have as many cameras as channels displayed, the empty channels will remain grayed out and display No Signal in the upper left where the IP, bitrate and channel data would normally appear.
Remote Monitoring Setup Guide
The data in the upper left shows the device s IP address, the channel and the stream rate for that channel as well as which stream it is using. The function buttons allow you to perform operations within the display. Each button will only affect the channel it is attached to. Other channels will not be affected. Symbol Button Function Digital Zoom Select this button it will highlight in white and then click and drag within the video image to zoom in on that section. Clicking on the button again will return you to the original view. When this button is selected, you will begin recording it to your computer This will take still images of the video which will be saved according to your settings in Pic Path Turns audio on or off if this channel has audio connected to it.
In multi-screen mode, a channel can be clicked and dragged to another location. This is useful in those modes where one or two screens are larger than the others. The channel being replaced will move to the old location of the one that was moved. Double clicking on a channel will bring that to single screen mode.
Double clicking on it again will return to the previous multi-channel format. This operates along the same lines as the Search function described in Section 4. Enter the date and time range for the event you re searching for. You can also select the type of event as well as enable multi-channel playback.
Saving Selecting a file and pressing Download will open the save dialog box.
The system will append the date, start and end times to the file name just as when saving directly from the NVR. The files will be saved as. You cannot save a video file that you are currently playing back. You will have to end playback before selecting it for download. Click on Search and the files that meet your criteria will be listed at the bottom of the window. At this point, you can either play back or save the files. Like in the NVR itself, each playback can be individually controlled.
The screen with the green highlight will be the one that is controlled. There is no difference in the operation of the playback by using either option. That camera s icon will also be highlighted in green on the left hand side of the screen. Double clicking on a video stream will bring it to single-screen mode just as in live view. Alarm Clicking the Alarm tab at the top of the screen will open the Alarm window where you can configure any connected alarms as well as setting when alarms occur. This is identical to the methods used to set these features on the NVR itself. Please see Chapter 7 Alarms in the User Guide for instructions.
You may select another file for playback or enter new search parameters. An expanded manual for the software is included on the CD that came with the NVR and is also located in the same folder as the program on your computer. After installing the software covered in Section 3. The functionality is identical to that used in making these settings on the NVR. For details on configuring these settings to meet your needs, please reference the appropriate section s earlier in this manual. About This window provides information about the Webrec software.
You will have to enter your user name and password again to go back to viewing the NVR. Click on the blue Full Menu icon to the right of the Setting Manage button in the Tool Bar on the right side of the display. You can also give the NVR an identifying name and you can add a note in the Description field. You can also add other types of devices such as a network backup storage drive using this window. PICTURE You can return to this window to update your passwords, add or remove other devices and make network access changes if need be.
A prompt will pop up at the bottom right of the screen to indicate that the NVR has been added to the program. Click on the device name to expand the listing and you can add cameras. Real-Time Monitor Live monitoring and recorded video playback takes place in the Real-Time Monitor section of the window. Choose the screen view format you wish to use and then click on the segment of the screen where you want to place the first camera.
Then, click on the camera number in the Device List to add that camera. Repeat by selecting a new area. The area highlighted in green is the current camera view. Clicking on a camera icon while a camera view is highlighted will replace that view with the channel you just selected. The function buttons allow you to perform operations with and within the display. This does not have any relationship to the computer s audio Ends the video display for that channel 48 When you do not have as many cameras as channels displayed, the empty channels will remain grayed out and the area above each screen where the device name, stream and frame rate would be displayed will remain blank instead.
PICTURE The first three buttons in the row deal with image quality and size, while the remaining buttons will configure the display to show images. Window Controls The buttons at the top right corner of the PSS display window allow you to lock the display, offer shortcuts to certain functions and let you toggle normal window operations such as fullscreen, minimize and close the display.
You will have to re-enter your password to resume control of the program. This will also cause the PSS icon to disappear from your Windows application tray at the bottom of your screen in order to hide access to the program. It will be located in the Hidden Icons section of the tray until you select it at which time PSS will maximize. Switch to and from full-screen display In multi-screen mode, a channel can be clicked and dragged to another location.
Close Closes PSS. You will have to confirm the closure by entering your password. For expanded descriptions on the operations and functions of these buttons, please see the PSS manual located on the installation disk or on your computer - located with the PSS software itself. This function was covered earlier in this section under Connecting to the NVR. This is also where you access the NVR itself to change settings.
Step 1. Step 2. Click on Advanced in the menu. By clicking on the padlock icon at the top of this menu, you can separate this control from the rest of the display and position it anywhere on the screen. Clicking on the padlock returns it to its position in the main display. Step 3. Click on Device Config in the submenu. You can make changes or add new settings in the same manner as if you were at the NVR itself. Vegas Pool Sharks. Angry Birds. Despicable Me: Minion Rush. Bloomberg Mobile. Documents To Go. Spy Cam Extreme. Photo Editor Ultimate.
PlayEpub Book Reader. RWC Explorer Pink. Cute Hoppie Theme. Tango Messenger.